We offer two styles of tape for joining EPDM panels together. The most common method for joining two pieces of liner in a pond is to use the cover tape. We strongly recommend using QuickPrime adhesive (below) in between the liner panels to secure them to each other then reapply QuickPrime over the joint where the liners meet. Apply 6" cover tape over joint and always use a roller to work out any air bubbles under tape. When joining liners in a stream situation, we recommend using the two sided tapes. These tapes can also be used under the cover tape when seaming pieces of liner together for extra protection.
DOUBLE SIDED LINER TAPE
Use this two sided tape to join two pieces of liner together. Available in 3" or 6" wide rolls. For maximum sealing use cover strip above in conjunction with this tape.
||Double Sided Cover Tape 3in x 25 ft Roll
||Add to Cart
||Double Sided splice Tape 3in x 100 ft Roll
||Add to Cart
Use this Aluminum Termination Bar
any time that EPDM liner
needs to be securely attached to concrete, wood, steel, etc. Bar is pre-punched for easy attachment. Trim off excess liner above termination bar...(click on product image for more details)
Latex Bonding Adhesive
(water based) Waterbased bonding adhesive for bonding epdm to wood.
Avergae coverage 150sq ft/ gallon.
Neoprene Bonding Adhesive (solvent based)
An adhesive used for bonding EPDM membrane to wood, metal, or concrete. Avg coverage: 75 - 100 sq feet per gallon. An additional Haz Mat shipping charge will be added to this item.
We offer two styles of tape for joining EPDM panels together. The most common method for joining two pieces of liner in a pond is to use the cover tape. We strongly recommend using Primer adhesive (below)...(click on product image for more details)
Pre-molded EPDM Pipe Boot used to seal pipe penetrations.
Fits pipe penetrations between 1" to 6". The stainless steel clamp is used to secure the top of the boot to the pipe.
Quick and easy...(click on product image for more details)
One important step in a good seam is to apply heavy pressure to the seam area to properly fuse the tape to the liner. These comercial grade rollers are perfect for applying heavy pressure to the seam. Silicone roller will not stick to tape or liner.
If your pond liner has a minor tear, fix it quickly and easily using the Firestone EPDM Liner Repair Kit. This kit contains all you need to quickly and easily repair minor damages to your liner. Two 6" x...(click on product image for more details)
Firestone QuickPrime Plus
is specifically designed to treat and clean PondGard EPDM liner
before splicing or seaming with Firestone QuickSeam products such as:
QuickSeam Cover Strip
QuickSeam Splice...(click on product image for more details)
A rubber based sealant used to seam exposed membrane edges to provide additional waterproofing protection. It can also be used as a quick applied sealant to repair punctures to PondGard membrane. 11 oz....(click on product image for more details)
Cleaning Pads used with EPDM Seam Primer are used to clean the area where seaming is to be applied.
Also known as tape activator. It should always be used to prepare the membrane area to be taped. Improves tape adhesion.
An additional Haz Mat shipping charge will be added for this item.