Cover Tape - Single Sided

Cover Tape - Single Sided

We offer two styles of tape for joining EPDM panels together. The most common method for joining two pieces of liner in a pond is to use the cover tape. We strongly recommend using Primer adhesive (below) in between the liner panels to secure them to each other then reapply Primer over the joint where the liners meet. Apply 6" cover tape over joint and always use a roller to work out any air bubbles under tape. When joining liners in a stream situation, we recommend using the two sided tapes. These tapes can also be used under the cover tape when seaming pieces of liner together for extra protection.

SINGLE SIDED LINER TAPE
A 6" wide single sided tape that is used to seam two panels of PondGard membrane together. Note: Requires cleaning of membrane prior to application. Use Primer to clean and dramatically improve tape adhesion to liners.

SKU Description Price Order
RT-6CCTP Single Sided Cover Tape - 6-in x 5ft. Increments $ 14.00 Add to Cart
RT-6CCTP100 Single Sided Cover Tape - 6-in. x 100 ft. Roll $ 280.00 Add to Cart

See More Pond Liner Accessories

Aluminum Termination Bar

Aluminum Termination Bar

Use this Aluminum Termination Bar any time that EPDM liner needs to be securely attached to concrete, wood, steel, etc. Bar is pre-punched for easy attachment. Trim off excess liner above termination bar...(click on product image for more details)
Bondline Latex Bonding Adhesive

Bondline Latex Bonding Adhesive

Latex Bonding Adhesive (water based) Waterbased bonding adhesive for bonding epdm to wood. Avergae coverage 150sq ft/ gallon.
Bondline Neoprene Bonding Adhesive

Bondline Neoprene Bonding Adhesive

Neoprene Bonding Adhesive (solvent based) An adhesive used for bonding EPDM membrane to wood, metal, or concrete. Avg coverage: 75 - 100 sq feet per gallon. An additional Haz Mat shipping charge will be added to this item.
EPDM Pipe Boot

EPDM Pipe Boot

Pre-molded EPDM Pipe Boot used to seal pipe penetrations. Fits pipe penetrations between 1" to 6". The stainless steel clamp is used to secure the top of the boot to the pipe. Quick and easy...(click on product image for more details)
EPDM Seam Rollers

EPDM Seam Rollers

One important step in a good seam is to apply heavy pressure to the seam area to properly fuse the tape to the liner. These comercial grade rollers are perfect for applying heavy pressure to the seam. Silicone roller will not stick to tape or liner.
Firestone Patch Kit

Firestone Patch Kit

If your pond liner has a minor tear, fix it quickly and easily using the Firestone EPDM Liner Repair Kit. This kit contains all you need to quickly and easily repair minor damages to your liner. Two 6" x...(click on product image for more details)
Firestone Quick Prime Plus

Firestone Quick Prime Plus

Firestone QuickPrime Plus is specifically designed to treat and clean PondGard EPDM liner before splicing or seaming with Firestone QuickSeam products such as: QuickSeam Cover Strip QuickSeam Splice...(click on product image for more details)
Lap Sealant/ Caulk

Lap Sealant/ Caulk

A rubber based sealant used to seam exposed membrane edges to provide additional waterproofing protection. It can also be used as a quick applied sealant to repair punctures to PondGard membrane. 11 oz....(click on product image for more details)
Liner Cleaning Pads

Liner Cleaning Pads

Cleaning Pads used with EPDM Seam Primer are used to clean the area where seaming is to be applied.
Seam Tape - Double Sided

Seam Tape - Double Sided

We offer two styles of tape for joining EPDM panels together. The most common method for joining two pieces of liner in a pond is to use the cover tape. We strongly recommend using QuickPrime adhesive...(click on product image for more details)
Tape Primer (Activator)

Tape Primer (Activator)

Tape Primer Also known as tape activator. It should always be used to prepare the membrane area to be taped. Improves tape adhesion. An additional Haz Mat shipping charge will be added for this item. QT-PRIMER G-PRIM