Pond Liner Accessories

Aluminum Termination Bar

Aluminum Termination Bar

Use this Aluminum Termination Bar any time that EPDM liner needs to be securely attached to concrete, wood, steel, etc. Bar is pre-punched for easy attachment. Trim off excess liner above termination bar then fill channel along top with Lap Sealant for a long lasting, waterproof seal.
Bondline Latex Bonding Adhesive

Bondline Latex Bonding Adhesive

Latex Bonding Adhesive (water based) Waterbased bonding adhesive for bonding epdm to wood. Avergae coverage 150sq ft/ gallon.
Bondline Neoprene Bonding Adhesive

Bondline Neoprene Bonding Adhesive

Neoprene Bonding Adhesive (solvent based) An adhesive used for bonding EPDM membrane to wood, metal, or concrete. Avg coverage: 75 - 100 sq feet per gallon. An additional Haz Mat shipping charge will be added to this item.
Cover Tape - Single Sided

Cover Tape - Single Sided

We offer two styles of tape for joining EPDM panels together. The most common method for joining two pieces of liner in a pond is to use the cover tape. We strongly recommend using Primer adhesive (below) in between the liner panels to secure them to each other then reapply Primer over the joint where...(click on product image for more details)
EPDM Pipe Boot

EPDM Pipe Boot

Pre-molded EPDM Pipe Boot used to seal pipe penetrations. Fits pipe penetrations between 1" to 6". The stainless steel clamp is used to secure the top of the boot to the pipe. Quick and easy installation Permanent weather-tight seal Dimensions: 1" to 6"
EPDM Seam Rollers

EPDM Seam Rollers

One important step in a good seam is to apply heavy pressure to the seam area to properly fuse the tape to the liner. These comercial grade rollers are perfect for applying heavy pressure to the seam. Silicone roller will not stick to tape or liner.
Firestone Patch Kit

Firestone Patch Kit

If your pond liner has a minor tear, fix it quickly and easily using the Firestone EPDM Liner Repair Kit. This kit contains all you need to quickly and easily repair minor damages to your liner. Two 6" x 6" patches, QuickPrime adhesive, a scrubber pad, a roller, and a pair of disposable gloves comprise the kit.
Firestone Quick Prime Plus

Firestone Quick Prime Plus

Firestone QuickPrime Plus is specifically designed to treat and clean PondGard EPDM liner before splicing or seaming with Firestone QuickSeam products such as: QuickSeam Cover Strip QuickSeam Splice Tape QuickSeam FormFlash QuickSeam Pipe Flashing QuickSeam Joint Covers QuickSeam Corner...(click on product image for more details)
Lap Sealant/ Caulk

Lap Sealant/ Caulk

A rubber based sealant used to seam exposed membrane edges to provide additional waterproofing protection. It can also be used as a quick applied sealant to repair punctures to PondGard membrane. 11 oz. tube seals approximately 20 lineal feet and is applied using a standard caulking gun. Advanced formula...(click on product image for more details)
Liner Cleaning Pads

Liner Cleaning Pads

Cleaning Pads used with EPDM Seam Primer are used to clean the area where seaming is to be applied.
Seam Tape - Double Sided

Seam Tape - Double Sided

We offer two styles of tape for joining EPDM panels together. The most common method for joining two pieces of liner in a pond is to use the cover tape. We strongly recommend using QuickPrime adhesive (below) in between the liner panels to secure them to each other then reapply QuickPrime over the joint...(click on product image for more details)
Tape Primer (Activator)

Tape Primer (Activator)

Tape Primer Also known as tape activator. It should always be used to prepare the membrane area to be taped. Improves tape adhesion. An additional Haz Mat shipping charge will be added for this item. QT-PRIMER G-PRIM